Radar Cross Section Reduction of a Flat Square Plate Using Plasma Coating Caused By Dielectric Barrier Discharge (DBD) Plasma Actuator

Document Type : Original Article

Authors

1 Mechanical Engineering- MUT

2 Faculty of Mechanical Engineering/ MUT

3 Malek Ashtar University of Technology, Shahin-Shahr, Iran

Abstract

One of the important issues in the aviation industry is the Stealth of flying vehicles. One of the stealth methods is to reduce the radar cross section of the target body by means of plasma coating and plasma absorption properties. DBD plasma actuators are widely used in flow control; however, this experimental study was designed to assess their effect on the level of radar cross section on flat plate in the setting of different voltages and frequencies. Plasma placement was investigated in two defferent configurations. Results reveal that the number and distance of the plasma actuators as well as their arrangement can influence the radar cross section. The study could eventually achieved 43.37% (~2/46 dB) reduction in radar cross section using DBD plasma actuator in frequency of 6 KHz and best arrangement.

Keywords


[1]     Chaudhury, B.; Chaturvedi, S. “Study and Optimization of plasma-Based Radar Cross Section Reduction Using Three-Dimensional Computations”; IEEE Trans. Plasma Sci. 2009, 37, 11, 2116-2127.##
[2]     Dehghan, M.; Razavi, R.; Ramezani, M. “Radar Cross Section Reduction of a Flat Square Plate Using Plasma Coating Caused By Alpha Particles”; Advance Defence Sci.&Technol., 2019, 03, 123-129.(in Persian)##
[3]     Singh, H.; Antony, S.; Jha, R. M. “Plasma-Based Radar Cross Section Reduction”; Computational Electromagnetics, Springer, Singapore, 2016.##
[4]     Chaudhury, B.; Chaturvedi, S. “Three-Dimensional Computation of Reduction in Radar Cross Section Using Plasma Shielding”; IEEE Trans. Plasma Sci. 2005, 33, 6, 2027-2034.##
[5]     Vidmar, R. J. “On the Use of Atmospheric Pressure Plasmas as Electromagnetic Reflectors and Absorbers”; IEEE Trans. Plasma Sci. 1990, 18, 4, 733-741.##
[6]     Wolf, S.; Arjomandi, M. “Investigation of the Effect of Dielectric Barrier Discharge Plasma Actuators on the Radar Cross Section of an Object”; J. Phys. D: Appl. Phys. 2011, 44, 31, 315202.##
[7]     Lee, S.; Oh, I.; Hong, Y.; Yook, J. “Analysis of Electromagnetic Wave Scattering Characteristics of Dielectric Barrier Discharge Plasma”, J. Korea Inst. Electromagn Eng. Sci. 2013, 24, 3, 324-330.##
[8]     Kim, Y., Jung, I., Yook, J., “Numerical Investigation of 3-D Radar Cross Section of Dielectric Barrier Discharge Plasma”; 2015 Asia-Pacific Microwave Conference (APMC), Dec. 2015.##
[9]     Mirhosseini, F.; Colpitts, B. G.; Pimentel, R.; Villers, Y.  “The Effect of Dielectric-Barrier-Discharge Plasma Actuators on Electromagnetic”; IEEE Trans. Plasma Sci. 2016, 44, 4, 665-669.##
[10]  Lee, H.; Jung, I.; Ha, J.; Shin, W.; Yang, J. M.; Lee, Y.; Yook, J. G. “Monostatic RCS Measurement for Dielectric Barrier Discharge Plasma”; J. Electromagn. Eng. Sci. 2016, 27, 3, 246-252.##
[11]  Kabbal, M. S.; Karunavathi, R. K.; Singh, D. B. “Study of Dielectric Barrier Discharge Plasma on Radar Cross Section Reduction”; Int. J. Eng. Tech. sci. Res. 2017, 4, 6, 627-634.##
[12]  Ha, J.; Shin, W.; Lee, J. H.; Kim, Y.; Kim, D.; Lee, Y.; Yook, J. G. “Effect of Plasma Area on Frequency of Monostatic Radar Cross Section Reduction”; J. Electromagn. Eng. Sci. 2017, 17, 3, 153-158.##
[13]  Kim, Y.; Kim, S.; Kim, D.; Lee, Y.; Yook, J.; “Radar Cross Section Reduction by Planar Array of Dielectric Barrier Discharge Plasma under Atmospheric Pressure”; J. Korea Inst. of Electromagn Eng. Sci. 2017, 28, 8, 646-652.##
[14]  Kim, Y.; Kim, S.; Lee, Y.; Yook, J. G. “Effect of Plasma Volume on Monostatic Radar Cross Section Control”; J. Electromagn. Wave App. 2018, 32, 15, 1939-1949.##
Kim, Y.; Kim, S.; Kim, D.; Oh, I.; Yook, J. “Numerical Investigation of Scattering from a Surface Dielectric Barrier Discharge Actuator under Atmospheric Pressure”; J. Electromagn. Eng. Sci., 2018, 18, 1, 52-57.##
Volume 8, Issue 1 - Serial Number 23
September 2020
Pages 27-37
  • Receive Date: 13 March 2020
  • Revise Date: 24 January 2021
  • Accept Date: 08 June 2020
  • Publish Date: 22 August 2020